Important Uses Of Car Batteries

The car battery is kind of rechargeable battery. Its basic operation is based on chemical reactions. The battery produces an ultimate potential of 12 volts. It make up is such that there are 6 lead acid cells each with an ultimate 2 volts to about 2.2 volts of potential. The cells are interconnected in series connection giving an overall combined potential of 12 volts. The overall combined potential is theoretically meant to be about 12.6 volts to about 13 volts but the resultant combined voltage is about 12 volts because of the internal resistance of the cell. Internal resistance is the resistive power to flow of current, within the cell. The internal resistance reduces the overall output because there is a potential drop within the cell itself.

After buying a car battery, the vendor will give vital advice on its maintenance, ensuring that even after purchase, the battery will serve the customer for as long as possible, it means the maintenance free battery Gold Coast is worth the money. The car battery is the basic power up for the car. This is because a car battery can produce high current over a short burst. Because of such a property where it can produce high current over a short burst, during ignition, the only load in the circuit, is the ignition circuit which has low resistance. With a combined low resistance of that of the car battery, that is, its internal resistance, the overall resistance is also low and the overall load subjected across the 12 volts potential of the car battery causes what may be called a short lived surge current which causes the ignition system to ignite, or to start the engine.

Caring for a car battery will require keenness as well as perfect observance. This is to prevent things like internal explosion of the car battery, sulfation as well as overloading of the battery. The car battery is meant to be properly ventilated based on the fact that the whole process of discharging and recharging. When charging, the lead sulfate compound which has been formed during discharging the battery. The lead sulfate compound is reverted back to lead oxide and pure lead. Sulfation will have an occurrence when there is formation of the mead sulfate compound, which is stable and remains so, without reversion back to lead or lead oxide during the charging process. Prevention of explosion of the car battery requires that the valves which allow circulation within the battery, are not blocked by substances such as grease or by accumulation of dirt. This was, the gases hydrogen and oxygen, usually released as an end product of the charging process, will be released into the atmosphere safely. This is part of caring for the battery.

This entry was posted in Services. Bookmark the permalink.